Network Configuration Guide for the Aixun P3208 Power Supply

Aixun P3208 is a high-powered, intelligent power supply tailored for mobile phone motherboard testing and repair, with convenient features like built-in Bluetooth and Wi-Fi for seamless updates. This guide provides a straightforward approach to configuring its network setup.

Aixun provides three ways to configure the P3208's network: through an AiXun WeChat mini program, via the Wi-Fi list after connection, or through a local configuration setup. Below, we explore the latter two options.

Method 1: Wi-Fi List Configuration
This configuration method is straightforward and user-friendly, allowing the Device technicians to select and connect to available Wi-Fi networks.
The user interface is as follows: 



Steps:
1. Connect t: Ensure the device is turned on and connected.
2. Open My Device Interface: Navigate to the “My Device” section.
3. Select the Wi-Fi Icon: Tap on the Wi-Fi button to access the Wi-Fi list.
4. Refresh the Wi-Fi List: Update the available networks to locate your preferred Wi-Fi.
5. Select and Connect: Choose the Wi-Fi network, enter the password, and press “Confirm.”
6. Completion: Wait until the device confirms a successful network connection.
Note: The P3208 currently supports only 2.4GHz Wi-Fi networks, and the Wi-Fi password can be left blank if necessary.

Method 2: Local Configuration
The local configuration option is designed for devices using version 1.00 of the Aixun RF Wireless Data Communication Module. Once configured successfully for the first time, the device will default to the Wi-Fi list configuration for future connections.
The user interface is as follows:



Steps:
1. Connect the Device: Ensure the power supply is connected and powered on.
2. Open My Device Interface: Go to the “My Device” section.
3. Select the Wi-Fi Icon: Tap on the Wi-Fi button.
4. Choose Local Configuration: Select “Local configuration” and follow the on-screen prompts to complete setup.
In case needed, Aixun devices use the default passwords “jcxxkeji.com” or “aixuntech.com” for Wi-Fi access.

Troubleshooting Tips
Should the configuration process encounter issues, try the following:
Restart Wi-Fi Connection: Turn off the device’s Wi-Fi on the Aixun platform, wait a few seconds, and then turn it back on before retrying.
Ensure 2.4GHz Compatibility: Confirm that the network operates on the 2.4GHz frequency  band.

There's an operation video: