Skip to content
Calibrating iPhone's battery or resetting iPhone's Battery Cell Cycles & Efficiency is a surprisingly important part of iPhone maintenance refurbishe industry. HMT-030 battery repair tool is a great for reset iPhone battery cycle data, calibrate and renovate iPhone Battery Health.
Software Version 2.3 Updates:
- Automatic countdown for 2 minutes after unexpected power failure to resume cycling.
- Default high voltage charging at 4.5V and 4.55V when charging battery with capacity below 82% for faster charging.
- Added battery level display.
- Adjusted discharge rate for straight type batteries to 0.2C (0.5C for L-type) based on user feedback and extensive testing to improve battery health.
- Added discharge current setting function for parallel connection of battery cells to increase discharge current and speed.
Button Instructions:
- Press the Up Button to set the target health value, then use the left/right buttons to switch the target health value. Press the confirm button to proceed.
- Press the Down Button to start battery efficiency from discharge. If the target value is not set in step 1, it defaults to ending the cycle process after reaching 100%. Press the confirm button to proceed.
- Press the Confirm Button to view data such as voltage, current, FCC, FDC, cycle time, battery model, state of health (SOH), etc.
- Long press the Confirm Button, then use the up/down buttons to set discharge current within the range of 500mA to 3600mAh.
FQA:
Q: What is DC? A: DC refers to the design capacity of the battery, often indicated as rated capacity on the surface of original batteries. See Appendix 1 for design capacities.
A: FCC stands for Full Charge Capacity, and SOH is calculated as FCC/DC * 100%. Refer to question 1 for the definition of DC.
A: FDC refers to Full Discharge Capacity, indicating the actual capacity of the battery after cell transplantation. It determines the maximum FCC and indirectly influences the achievable SOH. See question 1 for the formula and its significance.
A: It's normal for SOH to increase slowly, especially for protection boards with SOH below 85%, and it accelerates after reaching 85%. See question 1 for details.
A: It may be due to damaged fans causing ineffective heat dissipation, triggering the thermal protection mode. See question 1 for details.
Q: What are the requirements for setting discharge current? A: L-type batteries default to 0.5C discharge, while straight type batteries default to 0.2C. Users can adjust the current for faster efficiency but should not exceed 0.5C to prevent battery wear. See question 1 for details.
We also have offers many multi-function battery repair instruments like Aixun BC01 Battery Health Calibrator for iPhone 11 to 14 Pro Max battery health data reading and writing, cycle times modification, charging, discharging, and activation.
Besides, the i2C KC02S Battery Repair Tester is a powerful tool that allows modification of iPhone 8-15 Pro Max battery health data and charging cycles without the need for a battery cable. 
It can reset battery capacity and cycle with one click, eliminate the "Important Battery Message" pop-up, and resolve issues related to non-genuine batteries. The i2C KC02S battery health programmer can reset battery capacity and cycle with one click. 
The W09 Pro V3 Battery Life Pop-up Tester can also fix the "Unknown Parts" pop-up and reset iPhone battery health data or cycle for iPhone 11-15 Pro Max. It bypasses bugs and resets battery health data or cycle without the need for a battery tag-on repair FPC cable. Besides battery repair tools, China Phonefix provides a variety of high-quality mobile phone repair tools, accessories and one-stop service for professional mobile phone repair master. Contacting PHONEFIX can get valuable insights to ensure the best return on investment for your specific iPhone battery repair requirements.
