Sucking Tin absorption wire for the tin absorbing excess solder, sucking tin absorption line for mobile phone motherboard repair tool, CP-3515/3015/2015/2515/1515 BGA desoldering braid solder remover wick except for the tin absorbing excess solder.
BGA Desoldering Braid Solder Wire CP-3515 3015 2015 2515 Sucking Tin Belt
Braided Copper Wire Desoldering Wick: Quickly removes unwanted solder when used with a soldering iron.
[ Option Tin absorption line ] :
- Option 1: CP-1515 -- 1.5mm Width, 1.5M Lenght
- Option 2: CP-2015 -- 2.0mm Width, 1.5M Lenght
- Option 3: CP-2515 -- 2.5mm Width, 1.5M Lenght
- Option 4: CP-3015 -- 3.0mm Width, 1.5M Lenght
- Option 5: CP-3515 -- 3.5mm Width, 1.5M Lenght
Warning :
- Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
- To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
Caution :
- Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
- Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
Usage :
- Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
- Remove the desoldering wick after the solder has been absorbed.
- Cut off the used section of the wick using nippers.
- Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.
Package includes :
- 1pcs x Braided Desoldering Wire
Skip to content