iPhone 16 Pro Common Face ID Issues Repairs

Damaged iPhone Components and unusable problems are common problems. If you are experiencing Face ID problems on your iPhone 16 Pro, especially after an update or due to other factors, there are several troubleshooting steps you can take to resolve the problem.

• Check for obstructions: Make sure nothing is covering the TrueDepth camera. This includes stains, cases, or screen protectors that may block the camera's view. If you are using the device in landscape mode, make sure your hand is not blocking the camera area.
• Restart your device: A simple restart can often resolve temporary glitches. To do this, go to Settings > General > Shut down, wait a few minutes, and then turn it back on.
• Reset Face ID: If Face ID still doesn't work, try resetting it. Go to Settings > Face ID & Passcode and select Reset Face ID. After resetting, follow the on-screen instructions to set it up again.
• Update iOS: Make sure your device is running the latest version of iOS. Sometimes, software updates can fix bugs that affect Face ID functionality.
• Reset All Settings: If none of the above steps work, consider resetting all settings on your iPhone. This will not delete your data, but it will reset system settings such as Wi-Fi passwords and wallpapers. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings.

If you have tried all of these steps and Face ID is still not working, it may be a hardware problem or a more complex software problem. In this case, it is recommended to contact a professional mobile phone repair person for help or get professional mobile phone repair tools for repair.

Recommended iPhone Face ID repair tools:

1. WYLIE Dot Matrix Extension Flexible Cable

Wylie X-15 Dot Matrix Extension Cable is used for iPhone Face ID function detection, calibration and repair.

2. JCID Romeo Face ID Repair Chip

JCID Romeo Romeo2 Face ID Chip solves iPhone X/11/12/13/14/15 series face recognition failure problems. Features:

1. No shims required, no backup operation required, one-time solution.
2. The thickness is only 0.38mm (including tin balls).
3. 0.05mm lower than the magnetic ring, there is enough space to place the chip.
4. No need to transfer FPC, no need to short-circuit MOS tubes, no need to install capacitors and grinding.
5. Replace the original chip, traceless repair, no need to manually short-circuit. 

3. JC V1SE Dot Projector Detection Board

JC V1SE dot projector detection board is used to repair the problem of iPhone face ID moving too high or too low. Used to detect iPhone dot projector flexible cable, read and write data of new dot matrix flexible cable. The above is the relevant information and tools about iPhone Face ID. Let's watch the video below:
How To Set Up Face ID On iPhone 16 / 16 Pro iPhone's Face ID makes it more convenient for us to use. If Face ID is damaged, you don't need to throw away the phone together, you only need to repair it accordingly. The above repair tools, iPhone Programmers, etc. can be obtained from China Phonefix.