Handskit Quick Heating T245 soldering station, OEM JBC C245 2.5s electronic welding iron, upgrade Mini Jabe UD-1200 Digital Soldering Iron, 2.5s JBC 245 Solder Station Sleep Mode Digital Bga Rework Station
Temperature step :
The temperature step value of the rotary encoder in the normal mode, and the temperature step value when setting temperature-related parameters in other menus;
Standby temperature (Standby): the operating temperature when the soldering iron enters the "standby mode". If the value of this option is less than 50, it will not be heated during sleep;
Default temperature (Boot-Temp): The default set temperature after the soldering iron is turned on. If you want the soldering station to save the set temperature when it was turned off last time, you can set this option to "0";
Standby time (Sleep-Time): After entering the sleep mode, it starts to count, then enters the standby mode, and the soldering iron stops heating. The bit 0 means that it will enter the standby mode directly after the sleep time. In standby mode, the soldering iron can only be awakened by the action of the encoder.
BUZVOL:
The volume setting when the encoder is turned or pressed, the value is 0~10, and 0 is to turn off the buzzer; cancel this function. Default 6
Display brightness (SCRNBRIT):
screen backlight brightness
Skip to content